This power wing is designed specifically for usage of the UxV/35™ as a quad copter.

The 18650 batteries are arranged in a 4S configuration. The power is turned on and off with a button.  An external safety enable is required to enable the pre-routed motor power to the ESCs. UxV/35™ stack power is always available when the power is turned on. Pi filtering is used for the generation of 5v and 3.3v power to the stack.

KA1020-01 Data Sheet

The UxV/35™ is thought of as a stack as that is how boards are connected. They can be planar as well.

This platform allows four stacks to be interconnected. It is designed to be the bottom board in 4 different UxV/35™ stacks.

Additionally, there are footprints for 40 position, 2mm ribbon cables of each side for further expansion.

These are great for usage in UGV and USV platforms or to create test benches for validation of specific functionality.

KA1040-01 Data Sheet

The UxV/35™ is thought of as a stack as that is how boards are connected. They can be planar as well.

This platform allows two stacks to be interconnected. It is designed to be the bottom board in 4 different UxV/35™ stacks.

Additionally , there are footprints for 40 position, 2mm ribbon cables of each side for further expansion.

These are great for usage in UGV and USV platforms or to create test benches for validation of specific functionality.

KA1041-01 Data Sheet